.png)
Product Overview
This line of Crown kettles are mounted in an enclosed cabinet base with an interior liner constructed of 316 stainless steel for high acid content products. A double wall kettle interior forms a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle is of hemispherical design for superior heat circulation.
A steam control valve and hot and cold water, deck mount fill faucet is mounted on the stainless steel counter top. Kettle is equipped with 2� (50 mm) sanitary draw off with perforated strainer enclosed in the cabinet for sanitary purposes. Steam trap and a safety relief valve are standard. Swing drain for draw-off valve is removable without tools and is equipped with removable strainer. DMS & DMT models include a one-piece stainless steel spring assist cover.
Cabinet base is of modular design to match other Crown cooking equipment as required and is equipped with 6� (152 mm) stainless steel legs with 4 adjustable flanged feet for securing to the floor. All stainless steel exterior, # 4 finish, with removable side panels and doors with magnetic latches.
DMT models are equipped with a 1/2 H.P. hydraulic system for tilting which allows complete emptying of contents. Tilting may be stopped at any time without kettle tilting back. A standard pan support holds one 12� x 20� x 2-1/2� pan (305 mm x 508 mm x 64 mm), keeping the pan in a horizontal position throughout the tilting operation and is removable without tools.
The unit is ASME Code stamped and National Board Registered and NSF Certified. DMT models are also c-CSA-us certified.
Features
- Stainless steel cabinet
- 4 Adjustable flanged feet
- One piece spring assist cover
- 2? (51 mm) tangent draw off valve c/w TPS-2 strainer
- Steam control valve and steam trap
- Swing drain
- Hot and cold deck mount faucet (DMF)
- Hydraulic tilt (DMT models)
- Pan carrier (DMT models)
Options
- 50 PSI (345 kPa) for high temperature cooking
- 220 VAC, 1 phase, 50 Hz.
- Etched gallon markings (GM-)
- Etched litre markings (LM-)
- Graduated measuring strip (CMS-)
- Solid stainless steel disc for draw-off valve (TSS-)
- Strainer hook (SH-)
- Pour lip strainer (TKS-)
- Triple basket assembly (TBA-)
